Denon DN-V210, DN-V310 manual Audio PB/CB PR/CR Component Video

(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors

Color component output connectors (PR/CR, PB/CB and Y)

The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors.

•The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.

•If your TV is compatible with progressive scan, press the “SHIFT” and “HDMI RES.” button on the front panel so that “P.SCAN” lights on the display. This results in a high quality picture with little flickering.

DN-V210/DN-V310

AUDIO IN

Y PB/CB PR/CR

L R COMPONENT VIDEO IN

TV

ENGLISH

NOTES:

•Use the three commercially available video cords to connect the DN-V210/DN-V310’s color component output connectors to the TV or monitor.

•Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV’s video format. When the TV is NTSC formatted, set to NTSC. When the TV is PAL formatted, set to PAL. (See page 24.)

•Set the “480p/576p” in “HDMI RES.” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV.

•Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24)

•No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are played.

•When VIDEO OUT in the VIDEO SETUP menu is set to “RGB,” component video is not output. (Europe model only)

7