Denon DN-V310 manual To change the MP3/WMA file, To return to the initial disc information screen

Models: DN-V310 DN-V210

1 83
Download 83 pages 14.53 Kb
Page 65
Image 65

ENGLISH

3

Use the 5 and cursor buttons to select the MP3/WMA file you want to play, then press the PLAY button or ENTER button.

• Playback starts.

The display can be switched between the single

elapsed time and the single remaining time by pressing

the DISPLAY button.

To change the MP3/WMA file

Press the STOP button, then use the 5 and cursor

buttons to reselect the desired MP3/WMA file.

To return to the initial disc information screen

Use the 5 cursor button to select “ Up..” at the

upper left of the screen, then press the ENTER button.

Remote control unit

ENTER

UP. . .

Edit Mode

: Off

 

File 01

Program View

 

File 02

Add to Program

File 03

 

 

File 04

 

 

File 05

JPEG Preview

File 06

 

 

File 07

 

 

The screen in step 1 reappears.

Remote control unit

Main unit

Remote control unit

NOTES:

The DN-V210/DN-V310 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 44.1 kHz) and WMA. It is not compatible with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc.

It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.

The digital signals output when playing MP3/WMA files are MP3/WMA signals converted into PCM, regardless of whether the audio output presetting is set to “normal” or “PCM”.

In general, the higher an MP3 file’s bit rate, the better the sound quality. On the DN-V210/DN-V310, we recommend using MP3 files recorded with bit rates of 128 kbps or greater.

WMA files are 64kps or greater.

MP3/WMA files may not be played in the expected order, since the writing software may change the position of the folders and the order of the files when writing them on the CD-R/RW.

When writing MP3/WMA files on CD-R/RW discs, set the writing program to store the files in the “ISO9660 level 1, level 2 or Joliet” format. The physical format of the CD to Mode1, Mode2, or XA Form1.

With the DN-V210/DN-V310 it is possible to display folder names and file names on the screen like titles. The DN-V210/ DN-V310 can display up to 15 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.

Total number of folders is less than 256, and the total number of files is less than 1000.

Be sure to add the extension “.MP3” to MP3 files,. “.WMA” to WMA files. Files cannot be played if they have any extension other than “.MP3/.WMA” or if they have no extension.

Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of a disc, the disc may get stuck inside the DN-V210/DN-V310 and be impossible to eject.

The DN-V210/DN-V310 is not compatible with packet write software.

58

Page 65
Image 65
Denon DN-V310, DN-V210 manual To change the MP3/WMA file, To return to the initial disc information screen