Part names and functions
Top panel
For buttons not explained here, see the page indicated in parentheses ( ).
E2 E3E4E5E6E2 E3E4
E1 | q | |
E0 | w | |
W9 |
| |
W8 | e | |
W7 | ||
| ||
W6 | r | |
| ||
W5 | t | |
| ||
| y | |
W4 | u | |
| ||
W3 | i | |
| ||
| o | |
W2 |
| |
W1 |
| |
| Q0 | |
| E7 E8E9 | |
W0 | Q1 | |
Q9 | Q2 | |
| ||
Q8 |
| |
| Q3 |
Q7 | Q4Q5 | Q6 | Q5 Q4 |
qUSB enable display (USB)
•Lights a pale blue color when connected to a computer.
•Lights a deep blue color when MIDI command is sent.
w Booth/Send, Effect/Send level adjustment knob (BOOTH/SEND LEVEL)························ (5)
eDisplay
Displays the BPM value and device settings.
rBeat display················································· (11) tBeat switch button (BEAT)············ (11, 14, 15)
yTap button (TAP/LOCK/AUTO/INPUT BPM)···· (11, 14, 15)
TAP:
•When this button is tapped repeatedly, the BPM is measured using the intervals between taps.
LOCK:
•When this button is pressed once in the auto BPM mode, the BPM value measured automatically is locked.
AUTO BPM:
•When this button is held down for one second, the mode switches to auto BPM mode, and the measured BPM value is displayed.
INPUT BPM:
•When this button is held down for more than 2 seconds, the mode switches to BPM input mode, and the BPM value can be entered directly using the t beat selection button. This mode is cleared by pressing the button again.
uSend/Return mode selection button (SEND/RETURN)········································ (10)
iSend/Return mode display (SEND/RETURN)········································ (10)
oEffect selection knob
(EFX SELECT)·············································· (11)
Q0Effect filter adjustment knob
(EFX FREQ)·················································· (11)
Q1Effect CUE button (CUE)···························· (11)
Q2Dry/Wet adjustment knob (DRY/WET)··················································· (11)
Q3Effect ON/OFF button (ON/OFF)······················································ (11)
Q4Channel effect send button
(EFX SEND)·················································· (11)
• Flashes for target AUTO BPM
Q5Channel fader
(CH FADER)·············································· (9, 12)
Q6Cross fader
(CROSS FADER)······································ (9, 12)
Q7Headphone level adjustment knob (PHONES LEVEL)··········································· (9)
•When using headphones, be cautious to avoid prolonged loud volume in order to protect your ears.
Q8Split cue button
(SPLIT CUE)··················································· (9)
Q9Headphone pan adjustment knob (PAN)···· (9)
W0Channel monitor selection button (MONITOR CH1/CH2)···································· (9)
W1Channel fader contour adjustment knob (CH FADER CONTOUR)······························· (13)
W2Cross fader contour adjustment knob (CROSS FADER CONTOUR)······················· (13)
W3MIC/AUX1 send level adjustment knob (LEVEL)··························································· (9) Adjusts the send level to the master output for the mic signal or AUX1 input signal.
W4MIC/AUX1 effect insertion button
(EFX INS)························································ (9) Various effects can be applied to mic input signals and AUX1 input signals. Flashes for target AUTO BPM
W5MIC/AUX1 EQ adjustment knob (HI/LOW)························································ (9) Adjusts the frequency characteristics for the mic input signal and AUX1 input signal.
3