W6MIC/AUX1 input selection button (SELECT)························································ (9)

W7MIC/AUX1 input display (MIC/AUX1)··················································· (9)

W8SIG/PK display·············································· (9) Signal/peak meter for MIC/AUX1 input level.

Off:

•No signal input. (Less than -60dBFS)

Green:

•Signal Input

(More than -60dBFS – less than -20dBfS)

Orange:

• Suitable Input Level

(More than -20dBFS – less than -6dBFS)

Red:

•Excessively high signal input level (more than -6dBFS)

W9DUCKING ON/OFF button (DUCKING)····················································· (9)

Top panel

E8Channel cue master level

meter display switch ································· (14)

E9Master level mode display (MASTER)

•Lights red for the master output mode.

•Off for the channel input mode.

Front panel

u y t r

q w

e

use Before

 

and names Part functions

 

Connections

 

Basic operations

 

Effector function

E0Mic trim adjustment knob

(MIC TRIM)····················································· (9) Adjusts the input level for the mic input signal and AUX1 input signal.

E1Mic ON/OFF button (MIC)···························· (9)

E2Channel input source selection knob (SOURCE SEL)··································· (9, 12, 15)

E3Channel input level adjustment knob (LEVEL)··························································· (9)

E4Channel isolator EQ adjustment knob

(HI, MID, LOW)··············································· (9)

E5Master output level adjustment knob (MASTER LEVEL)·········································· (9)

E6Master effect insertion button

(EFX INS)················································ (11, 14) When this button is pressed, various effects are applied to the master output signal. Flashes for target AUTO BPM

E7Channel cue master level meter (CH1, CH2, L/CUE, R/PGM)

The display can be switched between 2 display modes.

Split CUE OFF:

•Displays the master output volume level.

Split CUE ON:

•Displays the volume level for the right channel master CUE (monaural) and left channel CUE (monaural).

qHeadphone jack (PHONES) wChannel fader start switch

(CH FADER START)····································· (12)

eCross fader start switch

(CROSS FADER START)······························ (12)

rCross fader torque adjustment hole

(FLEX FADAR ADJ.)···································· (13)

tStandby mode switch

(STANDBY MODE)········································ (4)

•ON:

Enables the automatic standby function.

•OFF:

Disables the automatic standby function.

yStandby display (STANDBY)···················································· (4) Lights red when in standby mode.

uRestart button (RESTART)··························· (4) While this button is pressed when the unit is in standby mode from the automatic standby function, standby mode is cancelled, and the power switches on.

nnAbout the automatic standby function

While the power is on, if the unit is not operated

(*)for approximately 8 hours, or if there is no input from the current input source for approximately 8 hours, the unit automatically enters standby mode. zz:Excluding the mic trim adjustment knob.

Fader function Start

 

settings USB

 

Troubleshooting

 

specifications

 

IndeX

 

diagram System

 

4