Fader start function
use Before |
Cross fader
Channel fader
The fader start function controls playback/pause of the CD/Media player using the fader control on the unit by sending a fader command to the player.
Connect the FADER terminal on this unit to a FADER compatible DJ player using a 3.5mm stereo mini plug cable in advance.
Channel fader start
1 Switch the CH FADER START to ”ON”.2 Adjust SOURCE SEL to match the CD input (”CD1” or ”CD2”).3 Move the channel fader knob for the CD input channel to the lowest position.The player switches to CUE up status.
4 Move the channel fader knob upwards. The CD player starts playback.
If the channel fader knob is then moved all the way down, the player stops.
Cross fader start
This section explains how to start playback for a CD/Media player connected to CH1.
1 Switch the CROSS FADER START to ”ON”.2 Turn the CH1 SOURCE SEL to ”CD1”.3 Slide the cross fader all the way to the ”2” (CH2) position.4 The player switches to CUE up status.5 Set CROSS to a position other than ”THRU”.6 Move the cross fader in the opposite direction.
NOTE
If you set CROSS to the “THRU” position, the cross fader start function will be disabled.
and names Part functions | |
| |
Connections | |
| |
Basic operations | |
|
|
function | Effector |
|
|
|
|
function Start | Fader |
| |
settings USB | |
| |
Troubleshooting | |
specifications |
|
IndeX |
|
diagram System |
|
12