USB device mode

The USB device mode (USB B terminal) supports the following functions.

•USB audio interface function

•USB MIDI interface function

Using this function, music files stored on the computer can be played back through this unit, and sounds played through this unit can be saved to the computer.

USB audio input/output

This unit is equipped with a maximum 8ch (stereo 4 system), 24bit, 96kHz USB audio input/output sound card function. The sampling frequency can be selected from 44.1k, 48k, and 96kHz.

•The default setting is 96kHz. If your software does not support 96kHz sampling, use the procedure below to switch the sampling frequency.

Selecting the sampling frequency

1 When the power is OFF, press POWER while holding down EFX INS.

The power switches on, and the mode switches to sampling frequency mode.

2 Press BEAT o or p to display the sampling frequency that you want to set.

44.1kHz 48kHz 96kHz

3 Press TAP.

The displayed sampling frequency is selected and saved.

4 Press POWER to turn the power off, and then press POWER again to turn the power on again.

• When this unit restarts, the sampling frequency setting is set.

NOTE

•For Windows PC users:

If ASIO driver version 1.01 is already installed for other Denon DJ product, uninstall it first, and then install the 2.1x version found on the included CD-ROM or our website. You should do this before connecting the DN-X600 to your computer.

•Set the computer OS to match the computer you are using ((vpage 13) ”Computer OS Settings”).

USB audio output

The following signals are always outputted from the 4-system stereo USB audio output. Select the desired signals through your software application on your computer.

•USB 1/2 CH1 or DVS CH1

•USB 3/4 CH2 or DVS CH2

•USB 5/6 MIC or USB EFX SEND

•USB 7/8 REC

USB audio input mode settings

For the USB audio signal input mode, there are 2 different methods of mixing processes, channel, “CH” and master, “MAS”. Set them accordingly as listed below.

• The default mode is ”CH INPUT mode”.

1 While pressing MASTER, press BEAT o, p. The mode changes to USB audio setting mode.

2 Press BEAT o,p to select the USB audio mode.

CH INPUT mode

MASTER mode

CH INPUT mode

Mixes the sources input from the channels.

Set this mode if you do not want to use the mixer function supplied in the DJ software.

•USB channel 1 and 2 inputs Input channel 1

•USB channel 3 and 4 inputs Input channel 2

•USB channel 5 and 6 inputs USB EFX RTN

•USB channel 7 and 8 inputs Master bus

MASTER mode

DJ software mixer output is mixed in the DN-X600 internal bus. Mixing is performed with both the DJ software mixer function and the DN-X600.

Assign each USB audio input signal to the following busses.

•USB channel 1 and 2 inputs Master bus

•USB channel 3 and 4 inputs Cue monitor bus

•USB channel 5 and 6 inputs USB EFX RTN

•USB channel 7 and 8 inputs Master bus

3 Press TAP.

The USB audio mode setting is entered and saved.

• To cancel the settings, press SEND/RETURN.

4 Set the DJ software audio output settings to match the USB audio input mode settings.

•For details on how to configure the settings, see the instruction manual for the DJ software.

use Before

 

and names Part functions

 

Connections

 

Basic operations

 

 

Function

Effector

 

 

function Start

Fader

 

settings USB

 

Troubleshooting

 

specifications

 

IndeX

 

diagram System

 

 

14