Basic operation
LEVEL | SOURCE SEL POWER | ||
| MASTER | BEATo,p | TAP |
| LEVEL | ||
|
|
| |
ON/OFF(MIC) |
|
|
|
MIC TRIM |
|
|
|
DUCKING |
|
|
|
MIC LED |
|
|
|
SELECT |
|
|
|
EQ HI,LOW |
|
|
|
(MIC) |
|
|
|
EFX INS |
|
|
|
MIC LEVEL |
|
|
|
MONITOR |
|
|
|
CH1,CH2 |
|
|
|
PAN |
|
|
|
PHONES |
|
LEVEL |
|
SPLIT CUE | Channel fader |
| |
Cross fader | EQ HI,MID,LOW |
EFX ON/OFF
EFX SELECT
SEND/RETURN
Basic operation
1 Press POWER.
The power to the unit switches on, and the BPM display is shown.
2 Select the input source for each channel using
SOURCE SEL.
3 Adjust the input level using LEVEL.
The input level is displayed in the cue master level meter.
4 Adjust the sound quality between EQ HI, MID, LOW .
5 Adjustfader. the volume using the channel fader and cross
6 Adjust the output level using MASTER LEVEL.
MIC (Mic input)
1 Press ON/OFF (MIC).
•ON/OFF (MIC) lights up.
•MIC input is activated.
2 Press SELECT to select MIC. The MIC LED is lit.
3 Adjust the mic input level using MIC TRIM.
The optimum adjustment without distortion is at the position when the SIG/PK display is lit orange and occasionally lights red during microphone activity.
4 Adjust the mic sound quality using EQ HI and LOW.
5 Adjust the mic output level using MIC LEVEL.
nnTo apply effects to the mic input
Press EFX INS (MIC/AUX1).
nnTo activate the ducking function
The ducking function attenuates the master output sound signal level when mic input is detected. It prevents the mic volume being covered
by the music volume when a mic is used. Press DUCKING.
• DUCKING LED is lit green.
Headphone monitor
There are two methods for headphone monitoring. Switch between the two as desired for use.
1 Press MONITOR CH1 or CH2 to select the source to monitor.
The selected button lights up.
2 | Press SPLIT CUE to select the monitoring method. | |
SPLIT CUE mode | STEREO mode | |
SPLIT CUE mode
•SPLIT CUE lights up.
•The channel sound (CUE) selected in step 1 is outputted from the left headphone.
•The master sound is outputted from the right headphone.
•The sound is monaural sound.
STEREO mode
•SPLIT CUE switches off.
•The channel sound (CUE) selected in step 1 and master sound output in stereo.
3 Rotate PAN to adjust the balance between the CUE sound and master sound.
4 Adjust the headphone volume using PHONES LEVEL.
NOTE
When using headphones, be cautious to avoid prolonged loud volume in order to protect your ears.
9