EFX INS

 

 

 

 

 

 

 

EFX SEND BEATo,p

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EFX INS

EFX SELECT

EFX FREQ.
EFX CUE
EFX DRY/WET

EFX ON/OFF

Operating the effector

1 Press EFX SEND for the channel that you want to apply the effector to.

•The input source sound signal is sent to the effector.

•To apply the effector to the mic input or master output, press

EFX INS.

2 Set the BPM.

BPM is the base value for the effector. To obtain normal effects, match the BPM value with the BPM of the track.

The following three setting methods are available for the BPM value.

nnSetting Auto BPM

qPress TAP for more than 1 second.

•”Auto” is shown in the display.

•TAP LED lights up green.

wPress TAP (short push).

•The measured auto BPM value is displayed, and that value is locked.

•TAP LED switches off.

nnSetting Manual In BPM

qPress TAP for more than 2 seconds.

•The BPM value in the display flashes. w Press BEAT to set the desired BPM value. e Press TAP.

•The setting is complete.

nnSetting Manual TAP BPM

qRepeatedly press TAP in time with the input source rhythm.

•The BPM value for the interval between button presses is set.

3 Select the effector using EFX SELECT .
4 Press EFX ON/OFF to switch the effect ON.

•EFX ON/OFF lights up.

•Press EFX ON/OFF again to turn the effect off.

nnAdjusting the effects
Rotate EFX FREQ.

•Adjust the filter cut off frequency, and adjust the frequency band within which to apply the effect.

•This does not operate during SEND/RTN.

nnTo monitor the effect sound
Press EFX CUE.

Off On

When this is switched on, the effect volume can be monitored even when the effect is off. (Excluding ECHO and REVERB. )

nnTo adjust the proportion of original volume and effect volume
Rotate EFX DRY WET.

•When rotated in the DRY direction, the original volume proportion increases.

•When rotated in the WET direction, the effect volume proportion increases.

Beat setting

Adjust the beats based on the set BPM value.

The setting range for beats differs depending on the effector.

Press BEAT to select the set beat value.

The beat display switches.

GSelectable rangeH

•When REVERB/FLANGER/B·BREAKER/FILTER/B·SCRATCH are selected:

1/4 - 32

•When ECHO/DELAY/LOOP are selected: 1/16 - 4

11