Fader curve adjustment
Adjusts the startup response of the channel fader/cross fader.
nnAdjust the channel fader curve

Intermediate curve characteristics.
|
|
|
|
|
|
Slow startup curve |
|
|
|
| Fast startup curve |
characteristics. |
|
|
|
| characteristics. |
|
|
|
|
|
|
|
|
|
|
|
|
Adjusting the cross fader torque
1 Remove the rubber cap on the front panel.
Rubber cap

2 Move the cross fader to the far right edge so that the screwdriver will line up with the screw head inside.
USB settings
EFX INS | POWER |
BEATo,p
TAP
SEND/RETURN
MASTER 
EFX CUE 
• CH1 and CH2 have the same curve characteristics.
nnAdjust the cross fader curve
|
|
|  | ||||
| Sharp startup |
| |||||
| characteristics, with cut- |
| |||||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Set the cut position of the | |
Slow startup curve |
|
|
|
| |||
|
|
|
|
| cross fader. | ||
characteristics. |
|
|
|
|
| (11 levels: | |
(16 levels) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set the cross fader to ”THRU”.
Small (+) srcewdriver
3 Using a Phillips screwdriver, adjust the sliding torque.
•Rotate to the right:Increases the sliding torque so that the cross fader resistance is increased.
•Rotate to the left:Decreases the sliding torque so that the cross fader resistance is decreased.
4 After completing the adjustment, replace the rubber cap on the front panel.
NOTE
The cross fader is constructed of precision parts. Over tightening or over loosening the cross fader may affect the performance of the cross fader, or may damage it.
Computer OS settings
Before connecting a computer to this unit, set the OS of the computer that you want to connect with this unit.
• The default setting is ”PC”.
• Settings cannot be changed when the computer is connected.
While pressing EFX CUE, press BEAT o, p. | |
1 The mode changes to OS setting mode. | |
2 Press BEAT o, p to select the OS. | |
(Windows OS) | (Mac OS) |
3 Press TAP.
The OS setting is entered.
• To cancel the settings, press SEND/RETURN.
13