Desa LMFP33PR(A) Installing Batteries in Receiver, Installing Battery into Remote

INSTALLATION

Continued

INSTALLING BATTERIES FOR REMOTE RECEIVER AND HAND HELD REMOTE CONTROL

Four AA batteries and three AAA batteries are required to operate this heater with the wireless hand-held remote control set. Four AA batteries must be installed in the receiver and three AAA batteries in the hand-held remote control unit.

Note: Only use alkaline batteries.

Installing Batteries in Receiver

1.Locate slot on battery cover of receiver (see Figure 33). Firmly insert tool such as a small screwdriver, butter knife or dime into the slot and lift up to remove cover.

2.Insert 4 AA batteries into receiver. Positive and negative are marked inside receiver casing. Note: Receiver will not function if batteries are not installed correctly.

3.Slide tab on cover into receiver housing and snap cover back into place.

Installing Battery into Remote

1.Remove remote cover (see Figure 34).

2.Insert 3 AAA batteries into remote control (see Figure 34). Positive and negative are marked inside remote control casing. Note: Remote will not function if batteries are not installed correctly.

3.Slide remote cover back into place.

3 AAA Batteries

Cover

Remote

Control

Figure 34 - Installing Batteries in Remote Control

4 AA Batteries

Battery

Housing

Slot Cover

Receiver Backup Switch

Figure 33 - Installing Batteries in

Receiver

111604-01L www.desatech.com 19