INSTALLATION
Continued
WARNING:Failuretoposition thepartsinaccordancewiththese diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
WARNING: After installation and periodically thereafter, check to ensure that no flame comes in contact with any log. With the heater set to HI, check to see if flames contact any log. If so, reposition logs according to the log installation instruc- tions in this manual. Flames contacting logs will create soot.
It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs sup- plied with heater.
1.Place back log #1 on grate to fit as illustrated in Figure 23. Make sure middle section at bottom of log set is seated into
2.Place front log #2 against front grate prongs as shown in Figure 23.
3.Place crossover log #3 on top of front and back logs as shown in Figure 23.
4.Place lava rock around base of heater if desired.
WARNING: You must oper- ate this fireplace insert with the fireplace insert screen in place. Makesurefireplaceinsertscreen is in place before running fire- place insert.
Crossover
Log #3
Front
Log #2
Back
Log #1
Grate
Prongs
Chassis
Burner
Figure 23 - Installing Log Set
Burner Ports | Log Set |
Figure 24 - Installing Log Set (Top View)
Screws for
Mounting
Screen
Notches
Figure 25 - Installing Fireplace Insert
Screen
www.desatech.com | 17 |
