• MENU
6.5 Disk Write Mode – Setup Hard Disk
•Disk Overwrite : Select Overwrite Permission when Hard Disk Full
O N: Overwrite Hard Disk from Oldest Data
OFF: When Hard Disk Full, Stop Recording and
Buzzer Activate (Refer to Menu 6.3 Buzzer Setup)
• Disk Initialize Now : Refreshment Hard Disk
All Recorded Data Deleted
•When Select Disk Initialize, Alarm Message Showing. Select ‘Yes’ to Start Disk Initialize.
※When Change Disk Overwrite ON/OFF Mode, the Change will be Applied from Changing Time.
For Example When Overwrite On Mode & HDD Full, Change to Overwrite Off Mode and then it will be Applied New Data Fill HDD Full after Changing Time.
6.6System Information – Product information (Version etc)
•S/W Version : Indicate S/W Version of the Product
•H/W Version : Indicate H/W Version of the Product
•Video Signal Type : Indicate Video Signal Type
•Disk Size : Indicate Hard Disk Capacity
•Number of HDD : Indicate Present Installed HDD No.
•IP Address
•MAC Address
6.7Factory Default – Every Setup Initializing
•Press Enter to Start Initialize
•Showing Warning Message and Press OK to Run Initialize
•If do Factory Default, Every Setup is Initialized, but Saving Image is Not Deleted.
30
