Digicom 8D5499 user manual LED Description, Connectors Description

Digicom S.p.A. VoiceGATE Manual rev.2.0

1.1 LED Description

The VoiceGATE status can be checked through seven led indicators.

Lan x	Indicates the LAN ports status
	Off:	no device connected
	On:	device connected
Line x	Indicates the status of the two telephone lines
	Off:	device not registered at the GateKeeper or
		internal address book not configured.
	On:	device registered at the GateKeeper or internal
		address book configured
	Flashing:	line in use
Wan	Indicates the WAN ports status
	Flashing:	activity on the WAN port
Pwr	Indicates the status of the power
	Off:	VoiceGATE is not powered
	On:	VoiceGATE is powered

When all the LEDs are on, except the WAN led, it means the device is starting up. This operation takes about 45 seconds and takes place at the starting up, after a saving of the configuration or after a reset.

1.2 Connectors Description

Tel1-2	RJ11 connectors (FXS) for PSTN analog devices (telephones, modem, fax)
ISDN	RJ45 connector for ISDN telephones
Lan1-3	10/100Mbs (MDI-X) switch ports
WAN	10/100Mps (MDI) Ethernet port

Pag. 5