Digicom S.p.A. VoiceGATE Manual rev.2.0
Pag. 4
Digicom VoiceGATE is the ideal solution for the new Telecom Operators who want to take at
home or office the new POTs with integration of Voice (Voice over IP) and Internet. VoiceGATE
has 3 Ethernet ports (10/100) for the connection of local devices (Personal Computer, Printers,
etc.), 2 analog ports and, optional, 1 SO ISDN bus with 2 RJ45 ports (for the connection ISDN
telephones).
The connection to the network backbone (Uplink) will take place through the Ethernet
10/100BT or optionally via xDSL.
VoiceGATE integrates the Router function. The hardware architecture of VoiceGATE uses an
ARM9 microprocessor of latest generation at 140 Mips, which guarantees, in Router mode, a
throughput of more than 15 Mbps in full-duplex.
Through the VoIP functions it is possible to connect up to 2 analog devices (Telephones,
Modem, Fax) using the protocols G.711, G.723.1, G.729 A for all the voice functions.
VoiceGATE can be used with two different VoIP configurations:with and without GateKeeper.
The GateKeeper is a device that takes care of associating the telephone address with the IP
address.
To simply use the VoIP in your network, Digicom carried out a Address book inside VoiceGATE
to avoid the use of the Gatekeeper.
VoiceGATE can be used both in network with Gatekeeper and with the address book. In case
you will not use the Gatekeeper, it will be possible to configure the address book through a
graphic utility. (VoiceGate AddressBook.exe).
Technical Features
• VoIP capability H.323v3
• G.711, G.723.1, G.729 support
• Modem and Fax support over IP G.711
• 2 analog ports POTs POTs
• 2 ISDN ports
• ISDN Bus (S0) to connect ISDN phones (optional)
• 3 Ethernet ports 10/100BT
• Built-in Store & Forward switch
• Built-in IP router
• RIPv2 support
• RIP1 support compliant
• NAT, TFTP, DHCP support
• Can be managed through SNMP
• Up to 8 devices on ISDN bus
• Web based ROUTER configuration