Digicom S.p.A. | VoiceGATE | Manual rev.2.0 |
RIP
The information concerning the reading and the parameters setup of the RIP protocol are displayed in this window.
RIP: | Enables/Disables the RIP |
Silent Mode: | OnlyRX – It manages the routing table in reception only |
| RX+TX – It manages the routing table also in transmission |
Rip2 Mode: | Multicast – It indicates if the RIP packets must be sent to the |
| defined multicast address 224.0.0.9 (RIPv2) |
| Broadcast – It indicates if the RIP packets must be sent to the |
| interface broadcast address (RIPv1 compliant). |
Timer Rate: | Time in seconds. It shows the updating time of the internal tables. |
Supply Interval: | Time in seconds. It shows the forwarding time of the routing tables. |
Expire Time: | Time in seconds. It shows the time after which a route is removed |
| from the routing table. |
Garbage Time: | Time in seconds. It shows the time after which an expired route is |
| removed from the internal tables. |
Pag. 19
