Digicom S.p.A. | VoiceGATE | Manual rev.2.0 |
Private Network Configuration
The information concerning the reading and the LAN part parameters are displayed in this window:
Attention: do not insert an IP address of the same network used in the WAN configuration “PublicNetwork Configuration”. If the WAN address is 192.168.2.1 you
cannot use addresses 192.168.2.x.
Enable DHCP Server: | Enables/Disables the DHCP Server functionality to the LAN |
IP Address: | Device IP Address – LAN side |
Subnet Mask: | Device Network Subnet Mask |
Address Pool List: | List of IP addresses to be assigned to the devices connected on |
| the LAN side. (This features is on only if the DHCP server is |
| enabled) |
IP Address Pool Mask: | Network Mask of the addresses to be assigned to the LAN side. |
Router List: | Default Gateway for the LAN side |
Dns List: | List of active Domain Name Server |
Domain Name: | Domain name |
Leased Time: | Validity time for the IP address assigned to the devices |
| connected to the LAN side (valid only if the device is configured |
| as a DHCP server) |
NAT: | Enables/Disables the NAT protocol |
Pag. 17
