Digicom ES3310 manual Using the Flash, Setting the LCD Brightness

Using the Flash

Your camera has two flash settings:

Ö	Auto-flash: the flash fires automatically
	according to lighting conditions. Use this
	mode for general photography
Ö	Flash Off: the flash won’t fire under any
	circumstances. Use this mode when
	taking images in a place where flash
	photography is prohibited, or when the
	subject is distant (beyond the range of
	the flash).

Note

The flash cannot be used when battery power is low ().

Setting the LCD Brightness

Three brightness settings are available:

Ö Low LCD Brightness: Normally sufficient in dim lighting conditions

Ö Normal LCD Brightness: Use in intermediate lighting conditions. This is the default setting.

Ö High LCD Brightness: Use in bright conditions.

14