Digicom ES3310 manual Getting Up and Running, Loading the Batteries

Section 2

Getting Up and Running

Loading the Batteries

You must load 2 AA size alkaline batteries before the camera can be used:

1.Press down and hold the release button, and slide the battery/SD Card cover in the direction of the arrow to release the cover.

Release button

2.Insert the batteries according to the correct

polarity marks (+ or -).	Release Button
3. Close the battery/SD card cover firmly.	Battery/SD
	Card Cover

-

+

SD Card AA Size Battery

Inserting and Removing an SD Card (Optional)

The camera comes with 16MB of built-in memory, allowing you to store images and movie clips. You can expand the memory capacity by using an optional SD (Secure Digital) memory card. To insert a memory card, refer to the figure above and:

1.Open the battery/SD card cover.

2.Insert the memory card with the metal surface facing the front of the camera.

3.Press the card into the slot until it locks into position.

To remove an installed SD card, press the card inwards to release it. When the card pops out, gently slide it from its slot.

4