Parameter | Description |
Designated Bridge | The priority and MAC address of the device through which this |
| port must communicate to reach the root of the spanning tree. |
Designated Port | The priority and number of the port on the designated bridging |
| device through which this switch must communicate with the |
| root of the spanning tree. |
Spanning Tree Configuration
The following figures and tables describe Bridge STA configuration.
Switch
Figure 3-15. STA Configuration - Switch
Parameter | Default | Description |
Usage | Enabled | Enable this parameter to participate in an STA- |
|
| compliant network. |
Priority | 32,768 | Device priority is used in selecting the root device, |
|
| root port, and designated port. The device with |
|
| the highest priority becomes the STA root device. |
|
| (Remember that the lower the numeric value, the |
|
| higher the priority.) However, if all devices have |
|
| the same priority, the device with the lowest MAC |
|
| address will then become the root device. |
|
| Range: 0 - 65535 |
|
|
|
DNswitch 800 | Configuring and Monitoring the Switch 23 |
