Digital Networks North America DNswitch 800 manual Vlan Static List, Vlan Static Table

VLAN Static List

Use this screen to create or remove VLAN groups.

	Figure 3-25. VLAN Static List
Parameter	Description
Current	Lists all the current VLAN groups created for this system. Up to
	256 VLAN groups can be defined. To allow this switch to
	participate in external VLAN groups, you must use the VLAN ID
	for the concerned external groups.
New	Allows you to specify the name and numeric identifier for a new
	VLAN group. (The VLAN name is only used for management on
	this system; it is not added to the VLAN tag.)
Status	Enables/disables the specified VLAN.
Add	Adds a new VLAN group to the current list.
Remove	Removes a VLAN group from the current list. If any port is
	assigned to this group as untagged, it will be reassigned to
	VLAN group 1 as untagged.

VLAN Static Table

Use this screen to modify the settings for an existing VLAN. You can add/ delete port members for a VLAN, disable or enable VLAN tagging for any port, or prevent a port from being automatically added to a VLAN via the GVRP protocol. (Note that VLAN1 is fixed as an untagged VLAN containing all ports on the switch, and cannot be modified via this screen.)

Figure 3-26. VLAN Static Table - Add/Modify VLAN

Parameter	Description
VLAN	The ID for the VLAN currently displayed.
	Range: 1-2048
Name	A user-specified symbolic name for this VLAN.
	String length: 8 alphanumeric characters
Status	Enables/disables the specified VLAN.

DNswitch 800 Configuring and Monitoring the Switch 33