Digital Networks North America DNswitch 800 Address Table Configuration

DNswitch 800 Configuring and Monitoring the Switch 19

Address Table Configuration

The Address Table contains the unicast MAC addresses and VLAN

identifier associated with each port (that is, the source port associated

with the address and VLAN), sorted by MAC address or VLAN. You can

also clear the entire address table, or information associated with a

specific address; or set the aging time for deleting inactive entries. The

information displayed in the Address Table is indicated in the following

figure and table.

Figure 3-12. Address Table

Parameter Description

Aging Time Time-out period in seconds for aging out dynamically learned

forwarding information.

Range: 10 - 415 secs; default: 300 secs.

Dynamic Address

Counts

The number of dynamically learned addresses currently in the

table.

Static Address

Counts

The number of static addresses currently in the table.

Address Table All entries, sorted by address or VLAN ID.

Address Table Sort

Key

The system displays the MAC address of each node and port

whose address table includes this MAC address, the

associated VLAN(s), and the address status (i.e., dynamic or

static).

New Static Address Use these fields to add or remove a static entry to the address

table. Indicate the address, port and VLAN group when adding

a new entry.

Add/Remove Adds/removes selected address.

Clear Table Removes all addresses from the address table.

Contents

Main Page Page Page Page Page Page Page Table of Contents Page 1. OVERVIEW Digital Networks WebView Description Features System Requirements Page 2. USING WEB-BASED MANAGEMENT Setting Up Web Management Setting an IP Address Setting a Default Gateway Setting the Administrator Password Setting Trap Destinations Enabling Web Management Starting and Stopping Digital Networks WebView Digital Networks WebView User Interface Areas of the User Interface Table 2-1. Areas of the User Interface Configuration Options Using Help 3. CONFIGURING AND MONITORING THE SWITCH Screen Hierarchy System Information Figure 3-2. System Information Switch Information Main Board IP Configuration Figure 3-4. IP Configuration SNMP Configuration SNMP Community Trap Managers Security Configuration Change Password Firmware Upgrade Options Web Upload Management TFTP Download Management Configuration Save and Restore Configuration Upload Management Configuration Download Management Address Table Configuration Page Spanning Tree Information Figure 3-14. STA Information - Ports Spanning Tree Configuration When the Switch Becomes Root Figure 3-16. STA Configuration - When the Switch Becomes Root STA Port Configuration The following figure and table describe STA configuration for ports. Figure 3-17. STA Port Configuration Configuring Bridge MIB Extensions Figure 3-18. Bridge Capability Bridge Capability Bridge Settings Figure 3-19. Bridge Settings Priority Port Priority Configuration Port Traffic Class Information VLAN Management Configuring Virtual LANs VLAN Basic Information VLAN Current Table VLAN Static List VLAN Static Table Page VLAN Static Membership by Port VLAN Port Configuration Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features. Figure 3-29. VLAN Port Configuration IGMP Multicast Filtering Configuring IGMP Multicast Router Port Information Static Multicast Router Port Configuration IGMP Member Port Table IP Multicast Registration Table Port Menus Port Information Port Configuration Use the Port Configuration menus to configure any port on the switch. Figure 3-36. Port Configuration Port Broadcast Storm Protect Configuration Figure 3-37. Port Broadcast Storm Protect Configuration Port Security Configuration Using a Port Mirror for Analysis Port Trunk Configuration Page Port Statistics Etherlike Statistics Figure 3-41. Etherlike Statistics RMON Statistics Page Page APPENDIX A. TROUBLESHOOTING Troubleshooting Cannot Connect to the Switch System is Disconnected from the Switch Frequently Asked Questions INDEX A B C D Q R S T U