70
Programming Your Remote Control
You may have already programmed your remote control during Guided S etup, but if you didn’t, or you
want to make changes, or you’ve acquired some new equipment, follow the se instructions.
You can program the DIRECTV R emote Control to operate your TV power, volume and mute,
additional equipment such as a DVD, VCR, stereo, or second TV or DIREC TV Receiver.
1) Press MENU to display the Quick Menu.
2) Highlight Settings and press SELECT.
3) Highlight Setup and press SELECT.
4) Press SELECT on Remote in the left menu.
5) Follow the onscreen instructions to program your remote for your TV or additional e quipment
(AV1 and AV2).
Once your remote is programmed to work with your TV, the VOL and MUTE key control the TV
regardless of the slide switch p osition. If you would like to change the VOL and MUTE to work
with other audio equipment, such as a stereo, you can. When you progra m the remote for the audio
equipment, onscreen instructions wil l direct you on how to do this.
If you
programmed
your Remote
Control during
Guided Setup,
you can skip this
section.