vi
Declaration of Conformity Standards to which Conformity is declared: FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference rece ived, including interference that may cause undesir ed operation.
Responsible Partys Name: Hughes Network Systems, Inc.
Address: 11717 Exploration Lane, Germantown, MD 20876
Telephone: 1-800-274-8995
Trade Name: Hughes
Type of Equipment: Satellite Receiver
Model Numbers: HAH-SA, HBH-SA, HRMC-11, HRMC-12
Federal Communications Commission (FCC)This equipment complies with both Part 15 and Part 68 of the FCC rules
Part 15 ComplianceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfe rence to radio or
television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving satellite dish antenna.
Increase the separation between the equipment and the DIRECTV® Receiver.
Connect the equipment into an outlet on a circuit different from that to which the DIRECTV R eceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio and TV
Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC.
To meet FCC requirement, only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with Class B limits may be attached
to this device. Operation with noncertified peripherals is likely to result in interference to radio and TV reception.
To meet FCC requirements, shielded cables are required to connect the device to a personal computer, peripheral, or other Class B certified device.
Part 68 Compliance This equipment complies with Part 68 of the FCC rules and requirements adopted by th e ACTA. On the rear panel of this equipment
is a label that contains, among other information, a product identifier in the format US:5L4DT00B3003670. If requested, th is information must be provided to
the Telephone Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must com ply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this p roduct. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on the telephone l ine may result in the
devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the local Telephone Company. For products approved after July 23, 2001,
the REN for this product is part of the product identifier that has th e format US:5L4DT00B3003670. The digits re presented by the ## are the REN without the
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If the DIRECTV Receiver (Model Numbers: HAH-SA, HBH-SA) causes harm to the telephone network, the Telephone Company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice isnt practical, the Telephone Company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The Telephone Company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this
happens, the Telephone Company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
If trouble is experienced with the DIRECTV Receiver (Model Numbers: HAH-SA, HBH-SA) equipment, for repair or warranty information, please contact
Hughes Customer Care Center
Germantown, MD 20876
Telephone Number: 1-800-274-8995
http://www.hns.com
email: hughestv@hns.com
If the equipment is causing harm to the telephone network, the Telephone Company may request that you disconnect the equipment until the problem is
resolved.
Hughes Network Systems must make any necessary repairs to the modem portion of this equipment in order to maintain valid FCC registration. Do not
attempt to repair or service your modem. Return it to Hughes Network Systems.
No repairs can be made by customers. All repairs must be done by Hughes Network Systems Authorized Service Centers (ASCs). This equipment cannot be
used on public coin service provided by the Telephone Company. Connection to Party Line Service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporate commission for information.

Federal Communications Commission (FCC) Regulatory Information