Dish Network 3.0, 3.1, 3.2 warranty Switching Between Tv And Device Volume Control

For AUX mode, the first group of flashes tells you what the AUX mode controls. A quick flash (zero) before the three-digit code is for a TV; one regular flash is for a VCR or DVD player; and two flashes is for a tuner or amplifier. For example, if the TV code is 570, the AUX mode button flashes once quickly, pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

SWITCHING BETWEEN TV AND DEVICE VOLUME CONTROL

When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume. However, if you want to use the AUX mode to control a tuner or amplifier and the device has a volume setting, you can set up the remote to control the device’s volume instead of the TV volume.

To set the remote to control the device’s volume:

1.Press and hold the AUX mode button

for three seconds, and then let go of it. The AUX mode button will blink.

2.Press the POUND (#) button.

3.Press the plus (+) side of the VOLUME button.

4. Press the 0 number button.

5.Press the POUND (#) button.

The AUX mode button flashes three times.

6.Press the SAT mode button.

7.Press the plus (+) and minus (-) sides of the VOLUME button.

The device’s volume changes and the AUX mode button lights instead of the TV mode button.

To set the remote back to control the TV volume:

1.Press and hold the TV mode button

for three seconds, and then let go of it. The TV mode button will blink.

11