CONVERTING THE 4.0 REMOTE CONTROL
By replacing the key at the bottom of the 4.0 remote, this remote can be converted to look and work like a 3.0 IR or to operate like a second UHF Pro remote to control the 
side of the DISH 322 receiver. The instructions below show you how to replace this key. After replacing the key, follow the instructions in Setting Up to Control the Satellite Receiver.
Note: If you do not need to replace the key, you do not need to complete the instructions below. Go to Setting Up to Control the Satellite Receiver.
1.Slide the battery cover off.
2.Insert your thumbnail in the seam between the remote control and the blue key to separate the key.
3.Grasp the key at the bottom and pull down firmly to remove.
4.If you are converting the remote to look and work like a 3.0 IR remote, then turn the removed key over with the green 1 side up (this key should not have a UHF Pro marking). Reinstall
the key with the green side
showing. Make sure the key snaps in place.
Note: Key has no UHF Pro marking.
4
