Proper Care of Your Equipment

PROPER CARE OF YOUR EQUIPMENT

Always handle the receiver carefully. Excessive shock and vibration can damage the hard drive.

Always turn the receiver off, unplug it, and then let it sit idle for at least 30 seconds before moving it.

If the receiver is cold to the touch, do not plug it in immediately. Let it sit unplugged at room temperature for at least 45 minutes before plugging it in.

The use of accessories or attachments not recommended by the receiver manufacturer will void the Limited Warranty.

If you plug the receiver’s power cord into an outlet that contains surge suppression, then verify you are using a HomePlug- compatible surge-protected power strip or socket . Do not plug the receiver into an outlet with ground fault protection.

During an electrical storm or when the receiver is left unattended and unused for long periods of time, unplug the power cord from the wall outlet, and disconnect the lines between the receiver and the antenna. This will provide additional protection against damage caused by lightning or power-line surges.

In some TVs, the presence of fixed images for extended periods of time may cause permanent imprints on the screen. Consult your TV’s manufacturer and user manual to determine if this is an issue for your TV.

v

Page 7
Image 7
Dish Network 176779, 922 SlingLoaded manual Proper Care of Your Equipment