2.2 Configure Your Router via Quick Start Wizard

Introduction

The Quick Start Wizard is designed for you to easily set up your broadband Internet access. You can directly access the Quick Start Wizard via Web Configurator.

Configure Your Router via Quick Start Wizard

Step 1. Open the web browser on a PC which is connected to the router and then link to the gateway IP address of the router (the default setting is 192.168.1.1). Once your link (http://192.168.1.1) is successful, a pop-up window will open to ask for username and password. Leave the default null value and press OK to continue.

If you fail to access to the web configuration, please refer to “Trouble

Shooting” guide.

Step 2. The Main Menu will pop out after completing previous step.

9

Page 15
Image 15
Draytek Vigor2100 manual Configure Your Router via Quick Start Wizard Introduction