Dukane 8755G-RJ, 8912-RJ user manual Correcting the keystone distortions, Using the magnify feature

Operating

Correcting the keystone distortions

1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.

2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following.

(1)AUTO executes automatic vertical keystone correction.

(2)MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons for adjustment.

KEYSTONE button

VIDEO	COMPUTER SEARCH
ASPECT		AUTO	BLANK
MAGNIFY	HOME	PAGE UP	VOLUME
ON
OFF	END	PAGE DOWN	MUTE
FREEZE	MY BUTTON		KEYSTONE
	1	2
POSITION			MENU

To close the dialog and complete this operation, press KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

●The adjustable range of this correction will vary among inputs. For some input, this function may not work well.

●When V:INVERT or H&V:INVERT is selected for MIRROR item in SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly.

●When the zoom adjustment is set to TELE (telephoto focus), the automatic keystone distortion correction may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible.

●When the projector is placed on the level (about ±0°), the automatic keystone distortion correction may not work.

●When the projector is inclined to near ±30 degree or over, this function may not work well.

●This function will be unavailable when Transition Detector is on (49).

Using the magnify feature

1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the

projector will go into the MAGNIFY mode. When the ON button of MAGNIFY is pressed first after the projector is started, the picture will be zoomed twice. The indication will disappear in several seconds with no operation.

MAGNIFY ON/OFF button

VIDEO	COMPUTER SEARCH
ASPECT		AUTO	BLANK
MAGNIFY	HOME	PAGE UP	VOLUME
ON

Use the ▲/▼ cursor buttons to adjust the zoom level. The picture of	FREEZE	END	PAGE DOWN	MUTE
		MY BUTTON		KEYSTONE
2. video, s-video or component video signal can be zoomed in up to 2	OFF
		1	2
times, and the one of computer signal can be zoomed in up to 4 times.	POSITION			MENU
To move the zoom area, press POSITION button in the MAGNIFY

mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press POSITION button again.

To exit from the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.

●The projector automatically exits from the MAGNIFY mode when the input signal is changed or when the display condition is changed.

●In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode.

NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want.

20