e-SHOT (Still Image Transfer) Display

e-SHOT (Still Image Transfer) Settings (Continued)

When the authentication setting is enabled, the following settings are required.

6)Click [Security Settings] on the main menu.

7)Select [Network Control] and enter the desired authentication password.

8)Click the [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), and Image Transfer Port (Port: 9716).

The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

e-SHOT (Still Image Transfer) Transmission

e-SHOT transmission requires an exclusive application for your PC. You can download it from the Hitachi web site. Refer to the manual for the application for instructions.

To display the transferred image, select the e-SHOT item in the NETWORK menu ("NETWORK menu" section of the User's Manual - Operating Guide).

NOTE • It is possible to allocate the image file up to 4 in the maximum.

The image file also can be displayed by using schedule function from the web browser. Refer to "Event Scheduling" (26) in detail.

30

Page 96
Image 96
Dukane 8912-RJ, 8755G-RJ user manual Shot Still Image Transfer Transmission, Shot Still Image Transfer Settings