Dukane 8912-RJ, 8755G-RJ Image menu, For a computer signal, For no signal, Over Scan, Position

IMAGE menu

IMAGE menu

From the IMAGE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item	Description
	Using the ▲/▼ buttons switches the mode for aspect ratio.
	For a computer signal
	NORMAL ó 4:3 ó 16:9 ó SMALL
ASPECT	For a video signal, s-video signal or component video signal
	4:3 ó 16:9 ó 14:9 ó SMALL
	For no signal
	4:3 (fixed)
	• This item can be selected only for a proper signal.
	• NORMAL mode keeps the original aspect ratio setting.
	Using the ▲/▼ buttons adjusts the over-scan ratio.
OVER SCAN	Large (It reduces picture) ó Small (It magnifies picture)
	• This item can be selected only for a video, s-video and component video signal.
	• When this adjustment is too large, certain degradation may appear
	at the frame area of the picture. In such a case, please adjust small.
	Using the ▲/▼ buttons adjusts the vertical position.
	Up ó Down
	• Over-adjusting the vertical position may cause noise to appear on the
	screen. If this occurs please reset the vertical position to the default setting.
V POSITION	Pressing RESET button when V POSITION is selected will reset V
	POSITION to the default setting.
	• When this function is performed on a video signal, s-video signal, or
	component video signal, the range of this adjustment depends on OVER
	SCAN (above) setting. It is not possible to adjust when OVER SCAN is
	set to 10.
	Using the ▲/▼ buttons adjusts the horizontal position.
	Left ó Right
	• Over-adjusting the horizontal position may cause noise to appear on the
	screen. If this occurs please reset the horizontal position to the default setting.
H POSITION	Pressing RESET button when H POSITION is selected will reset H
	POSITION to the default setting.
	• When this function is performed on a video signal, s-video signal, or
	component video signal, the range of this adjustment depends on OVER
	SCAN (above) setting. It is not possible to adjust when OVER SCAN is
	set to 10.

(continued on next page)

29