Dukane 8755G-RJ, 8912-RJ user manual Shot Still Image Transfer Display, Communication Port

e-SHOT (Still Image Transfer) Display

e-SHOT (Still ImageTransfer) Display

The projector can display a still image that is transferred via the network.

Communication Port

The following port is used for e-SHOT.

TCP #9716

NOTE • e-SHOT is not available via communication ports (TCP #23 and TCP #9715) (9) which are used for the command control.

e-SHOT (Still Image Transfer) Settings

Configure the following items from a web browser when e-SHOT is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter "http://192.168.1.10/" into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click the [Enable] check box to open the Image Transfer Port (Port: 9716). Click the [Enable] check box for the [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click the [Apply] button to save the settings.

29