OPTION menu
OPTION menu (continued)
Item
Description
This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
•COMPUTER1: Sets port to COMPUTER IN1.
•COMPUTER2: Sets port to COMPUTER IN2.
•COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)
•
•VIDEO: Sets port to VIDEO.
•
•INFORMATION: Displays a dialog of INPUT
The displayed dialog is switched as below every time the MY BUTTON is pushed.
When an input signal is found:
INPUT
MY BUTTON
When an input signal is not found:
NETWORK -INFORMATION- OFF
•AUTO KEYSTONE 
EXECUTE:
Performs automatic keystone distortion correction (34).
•MY MEMORY: Loads one of adjustment data stored (27).
When more than one data are saved, the adjustment changes every time the MY BUTTON is pushed.
When no data is saved in memory, the dialog "No saved data" appears.
When the current adjustment is not saved to memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise loading a data will lose the current adjusted condition.
•PICTURE MODE: Changes the PICTURE MODE (24).
•FILTER RESET: Displays the filter time reset confirmation dialogue (41).
•VOLUME+: Set the volume up.
•
| Selecting this item displays the SERVICE menu. | |
| Select an item using the ▲/▼ buttons, and press the ► button or the | |
| ENTER button to execute the item. | |
| FAN SPEED AUTO ADJUST GHOST FILTER MESSAGE KEY LOCK | |
SERVICE | FACTORY RESET I NFORMATION REMOTE FREQ. | |
FAN SPEED | ||
| ||
| Using the ▲/▼ buttons switches the rotation speed | |
| of the cooling fans. The HIGH is the mode for use at | |
| highlands etc. Note that the projector is noisier when the | |
| HIGH is selected. | |
| HIGH ó NORMAL |
(continued on next page)
42
