Dukane 8912-RJ, 8755G-RJ user manual SCREEN menu continued

SCREEN menu

SCREEN menu (continued)

Item

Description

	Using the ▲/▼ buttons turns on/off the message function.
	TURN ON ó TURN OFF
	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	“NO INPUT IS DETECTED”
	“SYNC IS OUT OF RANGE”
	“Searching…” while searching for the input
MESSAGE	“Detecting…” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the PICTURE MODE displayed by changing
	The indication of the MY MEMORY displayed by changing
	The indication of “FREEZE” and “II” while the projector is in the
	FREEZE mode.
	• If the projector goes into the FREEZE mode while the TURN OFF
	is selected, the picture on screen is frozen without any messages,
	which is not a malfunction. (21)

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.

(2)Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed.

(3)The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to

SOURCE NAME erase 1 character at a time. The name can be a maximum of 16 characters.

(4)To change an already inserted character, press the ▲ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the ◄/► buttons to select character to be changed. Once a character in the name is selected use the ▼ button to move the cursor back down to the character entry area to select and enter characters as described above.

(5)Select and press ENTER or INPUT buttons when finished entering text.

To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously.

39