Durabrand PDV-722 Remote Control Operation, Using the built-in rechargeable battery

C. Using the built-in rechargeable battery

The built-in rechargeable battery is suitable for portable use which allows you to enjoy the unique functions of the main unit outdoors.

Remember to charge the battery fully before initial use (about 5 hours).

NOTE: The built-in rechargeable battery only provides power to the main unit. The slave unit cannot play on the built-in rechargeable battery.

To charge the battery

1.Connect the DVD player and the power source as point A and point B on the previous pages. After 5 seconds, the battery LED indicator will turn on and start to flash.

2.The battery LED indicator will flash when the battery is charging and remain steadily on when the battery is fully charged.

3.Charging time is about 5 hours. A fully charged battery delivers about 2.5 hours of viewing time.

4.When the battery is weak, the low power icon “ ” will appear on the LCD screen and after that the power automatically turns off. If this occurs, please use the AC adaptor or car adaptor to recharge the battery or play the set on AC power.

REMOTE CONTROL OPERATION

1. Push the tab to open the battery cover.

2. Insert 2 size “AAA” alkaline batteries (included) into the battery compartment according to the + and – markings inside the battery compartment, then replace the battery cover.

NOTE:

•Point the remote control unit from less than 20 feet (6 m) from the remote sensor and within about 60o of the front of the unit.

•Batteries should be changed by an adult for safety.

•Reversing polarities will damage the batteries and possibly your remote. Be sure to follow polarities ( + and –) as indicated.

•Do not mix different types of batteries together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new ones.

•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.

•When the batteries becomes weak, the operating distance of the remote control decreases and you will need to replace the batteries.

•When the remote control is not to be used for a long time (2 months or more), remove the batteries to avoid possible damage that may be caused by battery leakage.

•Avoid keeping the remote control in extremely hot or humid locations.

•Do not point bright lights at the remote control sensor (like laser pointers).

•Do not place objects between the remote control unit and the remote control sensor.

•Do not use this remote control while using the remote control unit of any other equipment at the same time, the signals may mix.

11 IB-PDV722-WM-E-012007

IB-PDV722-WM-E-012007.pmd12

2/12/2007, 1:19 AM