INSTALLING THE DVD PLAYER IN YOUR CAR
You can install the DVD player on your car’s headrest back by using the supplied mounting straps.
1. Install the mounting straps on the DVD player.
Main unit
2.Mount the DVD player to your car’s headrest. Main unit
Loop the mounting strap around the headrest, adjust the length of the mounting strap to wrap the headrest tightly.
Slave unit
Slave unit
Loop the safety cord around the headrest, the safety cord will support the set in case the mounting strap opens up accidentally.
Loop the safety cord around the headrest, the safety cord will support the set in case the mounting strap opens up accidentally.
Loop the mounting strap around the headrest, adjust the length of the mounting strap to wrap the headrest tightly.
3.The two units are mounted on the car headrest, make sure the two units are installed securely, then you can connect the cables on the DVD player (refer to next page).
SAFETY WARNING!
1.This unit should never be used by the vehicle’s driver or left unsecured in the vehicle while driving.
2.If this unit is being used in your vehicle, be sure that it is secured, and doesn’t obstruct any safety device such as airbag or seat belts.
3.All passenger should wear seat belts when using this unit in a moving vehicle.
14 |
2/12/2007, 1:19 AM
