User Manual
Function name:
Port-based VLAN
Function description:
It shows the existed information of VLAN Groups List and maintains them, i.e. modify and delete one of them.
If you are in
Parameter description:
Metro Mode:
The Metro Mode is a quick configuration VLAN environment method on
Port 25 vs. Port 1~26:
Except Port 25, each port of the switch cannot transmit packets with each other. Each port groups a VLAN with Port 25, thus, total 25 groups consisting of 2 members are formed.
Port 26 vs. Port 1~26:
Except Port 26, each port of the switch cannot transmit packets with each other. Each port groups a VLAN with Port 26, thus, total 25 groups consisting of 2 members are formed.
Port 25&26 vs. Port 1~24:
Except Port 25 and Port 26, each port of the switch cannot transmit packets with each other. Each port groups a VLAN with Port 25 and Port 26, thus, total 24 groups consisting of 3 members are formed.
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field. Then, you will enter Tag Base VLAN Group Setting or Port Base VLAN Group Setting page, which depends on your VLAN mode selection.
Description:
The description defined by administrator is associated with a VLAN group.
Member:
This is used to enable or disable if a port is a member of the new added VLAN, “Enable” means it is a member of the VLAN. Just tick the check
box (;) beside the port x to enable it.
Publication date: July, 2006
Revision A2
40
