Edimax Technology ES-5224RS+ user manual Cabling Requirements for TP Ports

User Manual

2-1-3-1. Cabling Requirements for TP Ports

⇒For Fast Ethernet TP network connection

⎯The grade of the cable must be Cat. 5 or Cat. 5e with a maximum length of 100 meters.

⇒Gigabit Ethernet TP network connection

⎯The grade of the cable must be Cat. 5 or Cat. 5e with a maximum length of 100 meters. Cat. 5e is recommended.

2-1-3-2. Cabling Requirements for 1000SX/LX SFP Module

It is more complex and comprehensive contrast to TP cabling in the fiber media. Basically, there are two categories of fiber, multi mode (MM) and single mode (SM). The later is categorized into several classes by the distance it supports. They are SX, LX, LHX, XD, and ZX. From the viewpoint of connector type, there mainly are LC and BIDI LC.

⎯Gigabit Fiber with multi-mode LC SFP module

⎯Gigabit Fiber with single-mode LC SFP module

⎯Gigabit Fiber with BiDi LC 1310nm SFP module

⎯Gigabit Fiber with BiDi LC 1550nm SFP module

The following table lists the types of fiber that we support and those else not listed here are available upon request.

	Multi-mode Fiber Cable and Modal Bandwidth
IEEE 802.3z	Multi-mode 62.5/125μm					Multi-mode 50/125μm
	Modal					Modal
Gigabit Ethernet		Distance					Distance
	Bandwidth				Bandwidth
1000SX 850nm
	160MHz-Km	220m		400MHz-Km			500m
	200MHz-Km	275m		500MHz-Km			550m
	SFP.0LC.212.10/30/50/70/B0 Km (or GBI.ZSC.212.10/30/50 Km)
1000Base-	Single-mode Fiber 9/125μm
LX/LHX/XD/ZX	Single-mode transceiver 1310nm			10Km
	Single-mode transceiver 1550nm			30, 50, 70, 110Km
	SFP.0BL.621.202 (or		Single-Mode			TX(Transmit)	1310nm
1000Base-LX	GBI.ZBS.621.202)		*20Km			RX(Receive)	1550nm
Single Fiber						TX(Transmit)	1550nm
WDM Module	SFP.0BL.621.201 (or		Single-Mode
	GBI.ZBS.621.201)		*20Km			RX(Receive)	1310nm

Table2-1

Publication date: July, 2006

Revision A2

12