Edimax Technology ES-5224RS+ user manual Publication date July

User Manual

For different network applications, the subnet mask may look like 255.255.255.240. This means it is a small network accommodating a maximum of 15 nodes in the network.

Default gateway:

For the routed packet, if the destination is not in the routing table, all the traffic is put into the device with the designated IP address, known as default router. Basically, it is a routing policy. The gateway setting is used for Trap Events Host only in the switch.

For assigning an IP address to the switch, you just have to check what the IP address of the network will be connected with the switch. Use the same network address and append your host address to it.

Fig. 2-10

First, IP Address: as shown in the Fig. 2-10, enter “192.168.1.1”, for instance. For sure, an IP address such as 192.168.1.x must be set on your PC.

Second, Subnet Mask: as shown in the Fig. 2-10, enter “255.255.255.0”. Any subnet mask such as 255.255.255.x is allowable in this case.

Publication date: July, 2006

Revision A2

22