Installing the Software 17
ENGLISH
14. If you are using the DIVA Server BRI-2M in North America: From the Page
box, click “SPID Settings”.
• In “Number of Terminals”, enter the number of logical terminals for the
ISDN line. If your ISDN service provider assigned only one ISDN
number for your ISDN line, select 1. Otherwise, select 2.
• In “Subscriber Numbers and SPIDs”, enter the subscriber numbers
(ISDN numbers) and SPIDs specified by your ISDN service provider.
Depending on your switch type, you have to enter either one or two
SPID numbers for your ISDN line. Enter these numbers directly,
without spaces or hyphens.
Click “OK”.
Note For information on advanced parameters such as ISDN Protocol Settings,
see the online help.
Step Two: Install the WAN-Miniport driver
1. From the displayed message box, click “Yes” to install the WAN Miniport
Driver. Installing the WAN Miniport driver allows you to use Dial-up
Networking over ISDN.
The Eicon WAN-Miniport Driver Setup dialog box appears:
2. If you want to configure parameters such as shorthold settings, number
checking, and authentication features, check Advanced Parameters and
select the required option from the Page box. You are presented with
various parameters to configure. For more information, see the online help
or the online DIVA for Windows NT Reference Guide.
3. Click “OK”.