Eicon Networks Adapters To install DIVA for Windows NT featuring SBS on a server already running Microsoft SBS: , Conguring DIVA for Windows NT featuring SBS

Installing the Software 23

ENGLISH

To install DIVA for Windows NT featuring SBS on a server already running Microsoft SBS:

1. Insert the ISDN Software Suite CD-ROM into your CD-ROM drive.

2. Open the Network Control Panel: Click the “Start” button, point to

“Settings”, and select “Control Panel”. Double-click “Network”.

3. Click the “Adapters” tab, and then click “Add”.

4. In the Select Network Adapter dialog box, click “Have Disk”.

5. Enter the following path (where D is your CD-ROM drive letter):

D:\SBS\INSTALL\I386

Click “OK”.

6. From the Select OEM Option dialog box, select your adapter

(DIVA Server BRI-2M), and click “OK”.

Note If you are using an EISA bus computer, select “Eicon Autoconﬁgura-

tion EISA/MCA”.

7. If your computer has more than one bus type (for example, ISA and PCI),

the Active ISDN S0 Adapter dialog box appears. Select the bus type and

the bus number your adapter is using.

8. The DIVA for Windows NT featuring SBS Installation Wizard is launched.

Follow the on-screen instructions to complete the installation.

Conﬁguring DIVA for Windows NT featuring SBS

You should conﬁgure the server before you install clients. If you install client

software before conﬁguring the server, some services will not be accessible to the

clients because they were not available when the client software was installed.

After you install DIVA for Windows NT featuring SBS, use the SBS management

console to conﬁgure the required components.

To conﬁgure DIVA for Windows NT featuring SBS:

1. From the SBS management console, select the “Conﬁguration” tab.

2. Select “DIVA ISDN Conﬁguration”.

3. From the displayed screen, you can conﬁgure the required services.