Operating with the Remote Control
Adjustment buttons (P/R/O/Q)
BREAK TIMER button
FREEZE button
PICTURE MODE button
AUTO SYNC button
Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detect- ing input signal after the projector turns on.
Press FAUTO SYNC to manually ad- just with Auto Sync function.
Note
•When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 51.)
Displaying and Setting the Break Timer
1 Press k BREAK TIMER.
•The timer starts to count down from 5 minutes.
Press P/R/O/Q to adjust the
2 length of the break time.
•Increases with P or Q
5 minutes s6 minutes s60 minutes
•Shortens with O or R
4 minutes s3 minutes s1 minute
•The break time can be set in units of one minute (up to 60 minutes).
Canceling the break time display function
Press k BREAK TIMER.
Note
•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.
Freezing a Moving Image
1 Press NFREEZE.
• The projected image is frozen.
2 Press NFREEZE again to return to the moving image from the cur- rently connected device.
Selecting the Picture Mode
You can select the appropriate picture mode for the projected image, such as movie or video game.
Press GPICTURE MODE.
•When pressing GPICTURE MODE, the picture
mode changes in the following order:
Standard 
Presentation
Movie 
Game 
sRGB *
Note
•See page 42 for details on the picture mode.
*“sRGB” is displayed only when RGB signal is input.
36
