Eiki LC-W3 instruction manual Indicators, Projector Condition, Appendix

APPENDIX

	Indicators			Projector Condition
LAMP	WARNING	READY	LAMP
REPLACE	TEMP.
		green	red
yellow	red
				The projector is being cooled down. It cannot be turned on until
✽
				the READY indicator lights green.
				The projector detects an abnormal condition and cannot be
				turned on. Unplug the AC Power Cord and plug it again to turn
				on the projector. If the projector is turned off again, disconnect
				the AC Power Cord and contact the dealer or the service center
				for service and checkup. Do not leave the projector on. It may
				cause electric shock or a fire hazard.

✽	The projector is in the Power management mode.
✽	The temperature inside the projector is abnormally high.
	The temperature inside the projector is abnormally high. The pro-
✽	jector cannot be turned on. When the projector is cooled down
	enough and the temperature returns to normal, the READY indi-
	cator lights green and the projector can be turned on.

The lamp cannot light up. (The projector is preparing for stand- by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.)

The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the POWER ON-OFF button.)

	The life of the projection lamp draws to an end.
✽	Replace the lamp and then reset the Lamp time. The indicator
	will turn off.

• • • on • • • flashing • • • dim • • • off

✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.

54