Eiki LC-W3 Basic Operation, Turning On / Off Projector, Enter a PIN code, What is PIN code?

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON THE PROJECTOR

1	Complete peripheral connections (with a computer, VCR,
	etc.) before turning on the projector.
2	Connect the projector's AC power cord into an AC outlet.
	The LAMP Indicator lights RED, and READY Indicator lights
	GREEN.
3	Press the POWER ON-OFF button on the top control or on
	the remote control to ON. The LAMP Indicator dims, and the
	cooling fans start to operate. The preparation display
	appears on the screen and the count down starts.
4	After the count-down, the input source that was selected last
	and the Lamp control status icon (see page 40) appear on

the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Select a number by pressing the POINT LEFT/RIGHT button and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the POINT DOWN button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can start to operate the projector.

If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

16

The preparation display disappears after 20 ~ 30 seconds.

Selected Input Source and Lamp control

Lamp control status

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to PIN Code Lock function in Setting on page 42 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, write it down in column on page 59 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

20