
Part Names and Functions
Remote Control Battery Installation
1 | Open the battery | 2 | Slide the batteries into |
compartment lid. | the compartment. | ||
| Press the lid |
| Two AAA size |
| downward and slide it. |
| batteries |
|
|
| For correct polarity (+ |
|
|
| and |
|
|
| battery terminals are |
|
|
| in contact with pins |
|
|
| in compartment. |
Replace the
3 compartment lid.
Part Names and Functions
To insure safe operation, please observe the following precautions :
●Use (2)
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture, or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe case clean and install new batteries.
●Risk of an explosion if battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Operating Range
Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector.
16.4’ (5 m)
60° Remote control
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.
1 | Lift the front of the projector and pull upward the feet |
| lock latches on both sides of the projector. |
2 | Release the feet lock latches to lock the adjustable |
| feet and rotate the adjustable feet to adjust the |
| position and tilt. |
3 | Keystone distortion of the projected image can be |
| adjusted automatically with Auto setup function or |
manually with the remote control or the menu operation. (p25, 46, 47)
Feet Lock Latches
Adjustable Feet
15