Eiki LC-XB27 NO SHOW button, P-TIMER button, IMAGE button, Basic Operation, Remote Control

Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (p48), the screen changes each time you press the NO SHOW button as follows.

black out ➜ the captured image ➜ normal ➜ • • • • •

P-TIMER button

Press the P-TIMER button on the remote control. The timer display “00 : 00” will appear on the screen and the timer will start to count time (00 : 00 ~ 59 : 59).

To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display will disappear.

IMAGE button

Press the IMAGE button on the remote control to select a desired image level of the screen.

For more detail, see p35, 42.

The message will disappear after 4 seconds.

P-Timer display

Remote Control

NO SHOW button

P-TIMER button

IMAGE button

✔Note:

See the previous page for the other buttons.

28