Eiki LC-XB27 owner manual Wireless Mouse Operation, Remote Control Code, Part Names and Functions

Part Names and Functions

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 18 for connection.)

When the Pointer function is used, the wireless mouse is not available.

L-CLICK button

Acts as left click while the projector and a computer are connected with a USB cable.

PRESENTATION POINTER button

Move the pointer on the screen with this button.

R-CLICK button

Acts as right click while the projector and a computer are connected with a USB cable.

Remote Control Code

This projector has eight different remote control codes (Code 1-Code 8). Switching remote control codes prevents remote control interference when operating several projectors or video equipment at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in Setting on page 51.

1	With holding down the MENU button, press the
	IMAGE button. The code switches sequentially for
	one pressing the IMAGE button. (See the list below.)
2	To initialize the remote control code, slide the
	RESET/ON/ALL-OFF switch to RESET, and then to ON.
	The initial code is Code 1.
		Remote Control Code	Number of Times of
			Pressing IMAGE
			Button
		Code 1	1
		Code 2	2
		Code 3	3
		Code 4	4
		Code 5	5
		Code 6	6
		Code 7	7
		Code 8	8

While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.

MENU button

IMAGE button

14