
Video Input
Input Source Selection (Video, S-video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be selected through menu operation as described below.
Top Control
| POWER | WARNING | LAMP R |
ON | MENU | INPUT | AUTO |
S | |||
- |
|
| ET |
OFF |
|
| |
|
|
| |
| SELECT |
|
|
|
|
| + |
|
| V | |
|
|
|
INPUT button
INPUT button
Computer 1
(Analog/Digital)
Computer 2 ✳
Video
Wired
✳See Note at the bottom of this page.
|
| Remote Control |
Menu Operation | VIDEO button | |
1 | Press the MENU button to display the |
|
| Menu. Press the Point 7 8 buttons to move the red | Input Menu icon |
| framed pointer to the Input Menu icon. | |
| Input Menu | |
|
| |
2 | Press the Point ed buttons to move the red arrow |
|
| pointer to Video and then press the SELECT button to | Move the pointer |
| display the Source Select Menu . | |
| to Video and press | |
|
| the SELECT |
3 |
| button. |
Move the pointer to the source that you want to select |
| |
| and then press the SELECT button. |
|
Auto
When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order:
1.
2.Video
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select and press the SELECT button.
Video | When video input signal is connected to the | |
VIDEO jack, select Video. | ||
| ||
| When video input signal is connected to the S- | |
VIDEO jack, select | ||
|
✔Note:
•When Monitor out is selected in the Terminal function (p50), Computer 2 is not displayed.
•Wired, Wireless, and Memory Viewer are for the Network function. Refer to the owner's manual "Network
Video Input
39