Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. With the LASER button pressed, laser light goes on. The signal emission indicator lights red and laser is emitted with red light. With the LASER button pressed for more than 1 minute or released, the light goes off.
The laser emitted is a class II laser. Do not look into the laser light window or shine the laser beam on yourself or other people. Below are the caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not look into the laser light window while laser is emitted, otherwise eye damage may result.
These caution labels are put on the remote control.
Signal Emission Indicator
Laser Light Window 
Pointer Function
You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
Part Names and Functions
1 | With pressing the MENU button, hold down the NO |
| SHOW button for more than 10 seconds so that the |
| Pointer function will be available. (The Laser pointer |
| has switched to the Pointer.) |
2 | Press the LASER button on the remote control toward |
| the projector. Spotlight or Pointer is displayed on the |
| screen with the LASER button lighting green. Then |
| move the Spotlight or Pointer with the |
| PRESENTATION POINTER button. If the LASER |
| button does not light green and still emits laser beam, |
| try the procedure above until the LASER button lights |
| green. |
3 | To clear the Spotlight or Pointer out the screen, press |
| the LASER button toward the projector and see if the |
LASER button lighting turns off.
To switch back to the Laser pointer again, hold down the NO SHOW button with pressing the MENU button for more than 10 seconds or slide the RESET/ON/ALL- OFF switch to "RESET". (p12) When you reset the Pointer function, the remote control code will be reset, as well.
Spotlight | Pointer |
✔Note:
You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 51.
PRESENTATION POINTER button
MENU button
NO SHOW button
While pressing the MENU button, hold down the NO SHOW button for more than 10 seconds.
PRESENTATION POINTER button
LASER button
After the Laser pointer has switched to the Pointer, use the LASER button as the Pointer function
13
