21
Chapter 2 Adjusting Screen
● To adjust the gamma value [Gamma]
The gamma value can be adjusted. The lu minance of the monitor varies depending on t he input signal,
however, the variation rate is not proportional to the input signal. To keep the balance bet ween the input
signal and the luminance of the monitor is cal led as “Gamma correction”.
Adjustable range: 1.8-2.6
Procedure
1. Choose <C olor> from the Adjustment menu, and press .
2. Choose <G amma> from the <Color> menu, and press .
3. Adjust the gam ma value with or .
4. Pre ss to exit the adjustment.
NOTE
• The d efault setting for each sRGB/EBU/REC709/SMPTE- C/DCI mode is set to "Standa rd", which is the gamma
in conformity with each s tandard.
● To adjust the hue [Hue]
This function allows you to adjust the hue.
Adjustable range: -100 to 100
Procedure
1. Choose <C olor> from the Adjustment menu, and press .
2. Choose <Advanced Se ttings> from the <Color> menu, and press .
3. Choose <Hue>, and press .
4. Adjust the hue with or .
5. Pre ss to exit the adjustment.
Attention
• Th is function does not enable to display ever y color gradation.
● To adjust the color saturati on [Saturation]
This function allows you to adjust the satu ration of the color on the monitor.
Adjustable range: -100 to 100
Procedure
1. Choose <C olor> from the Adjustment menu, and press .
2. Choose <Advanced Se ttings> from the <Color> menu, and press .
3. Choose <Sat uration>, and press .
4. Adjust the sat uration of the color with or .
5. Pre ss to exit the adjustment.
Attention
• Th is function does not enable to display ever y color gradation.
NOTE
• Set ting the minimum (-100) turns the i mage to a monochrome screen.