25
Chapter 3 Setting Monitor
Chapter 3 Setting Monitor

3-1. Enabling/Disabling Mode Selection [Mode Preset]

Allows you to select the specied modes only.
Use this function when all the display modes a re not available or when keeping the display mode
unchanged.
Procedure
1. Choose < Tools> from the Adjustment menu, and press .
2. Choose <Mode Pr eset> from the <Tools> menu, and press .
3. Select the mode t o change its settings with or , and pre ss .
4. Select “On” or “Of f” with or .
5. Pre ss to exit the adjustment.
Attention
• You cannot set all t he modes disable. Set at least one mode to “On”.

3-2. Locking Buttons [Key Lock]

This function allows you to lock to prevent changing the a djusted/set status.
Procedure
1. Pre ss to turn off the monitor.
2. Pre ss holding down for at least 2 seconds to turn on the monitor.
The Optional Settings me nu appears.
3. Choose <Key Lock> f rom the <Optional Settings> menu, and pres s .
4. Select “Off ”, “Menu”, or “All” with or , and press .
Settings But tons that can be locked
Off (Initial settings) No ne (All buttons are enabled)
Menu button
All All buttons excluding
5. Select “Finish” wit h or .
6. Pre ss to exit.
The Optional Settings me nu is closed.